Can I Mount My Own TV?

Can I Mount My Own TV

The question is Can I mount my own TV? Our answer is Yes, you can mount your own TV on the wall. We will help you how you can mount a TV on a wall at this article step by step.

Flat screens are designed to be mounted on the wall. When they are not mounted, it’s like something is missing from your living room’s decoration. Therefore, many might wonder how they can mount a tv. If you also wonder can I mount my TV or not, keep reading this article to find some helpful information about TV mounting.
If you have the right tools, time and consider some rules, some hints can help you mount a TV.


The Right TV mounts are the key:

Choosing a wall mount is the first step in learning how to mount a TV. TV wall mounts come in a variety of styles.
Fixed TV wall mounts keep the television flush against the wall in a stationary position.
Swivel TV wall mounts allow you to pivot the screen to the left and right to accommodate viewing from different angles.
When positioned higher on the wall, tilting TV wall mounts allow you to slant the screen down for improved viewing.
Full-motion TV wall mounts provide you with manually adjusting the television for a specific angle by moving it right, left, up, and down. Some models come with a telescoping arm, which comes in handy when putting a TV in a corner.
Mounting hardware has the size and weight restrictions. Check the product specifications to ensure that the mounting brackets are compatible with your television.

Also, you can Hire a TV Mounting PRO to do this job for you by eenzy Handyman Services.

Choosing the right location:

Mounting a television on the wall needs some forethought. Think ahead before drilling holes in your wall to save time and tension. Start by choosing where you want to place your television.
Choose a location with convenient access to power outlets, cable input sources, and speaker and accessory connectors.
Determine the location of components such as cable boxes, gaming consoles, and DVD players.

Learn more: How can I Mount my TV without Drilling?

Consider putting a shelf behind the mounted TV to store important items.
Avoid direct sunshine, heat, and vibrations, and stay out of the way of oncoming cars.
Choose a load-bearing wall. The equipment and any related hardware and components must be able to securely withstand four times the combined weight on the wall.
Most TV-watching DIYers wonder how high a TV should be installed on the wall. When it comes to finding out how to mount a TV, many people believe that nothing else matters.
When seated, the best viewing height is to center the display at eye level. This is considered by many to be too low for a wall mount. Rather, they adhere to the following guidelines:
When seated, keep the bottom of the display no higher than eye level.
When standing, the top of the display should not be higher than eye level.
If you consider these parameters, you should be able to enjoy a pleasant watching experience.
After that, perform a test to determine the proper mount height and viewing height:
Cut a piece of paper or cardboard the size of your TV and tape it to the wall in the chosen spot.
You can also use painter’s tape to secure it to the wall.
Experiment with that location from various angles throughout the space. Make sure it’s centered and not too high that looking at it strains your neck.


Locate the Studs Correctly:

When installing a TV on the wall, you need to screw it into studs. Hollow-wall anchors are not recommended because they cannot hold the weight of the TV wall mount brackets and the television.
Run a stud finder down the top of the paper once you’ve chosen an excellent spot for hanging a TV on the wall.
Find the two best studs on the wall that will hold your television. (Some models are just attached to one stud.)
With a pencil, draw a circle around the middle of each stud. To be sure you’ve found a stud, use a nail.
*If you’re mounting a TV to a brick wall, you won’t need to look for studs. Instead, secure the mount to the wall with masonry anchors.

Pilot the Holes:

● Remove the paper and make a light pencil mark where the TV’s corners will be.
● On each TV mounting arm, measure the distance between the top and bottom holes. In the center of each stud, mark two points that correspond to these holes.
● Make sure the mounting holes for each arm are level with a level.

Locating the Wall Mount:

Use a level to ensure that the flat screen wall mount or TV mount brackets are leveled against the wall.
Hold the wall mount with the help of a friend.
Drill pilot holes in studs along the lines where you’ve made mounting marks using a drill.
*Remember the adage, “Mark twice, cut once.” “Cut only once.” Drilling in walls follows the same rule. Before drilling, double-check that the mounting holes are level.

Need TV mount? buy it from eenzy store.

Mount the Flatscreen:

Television can be both weighty and delicate. Get enough support to accomplish this step safely, depending on the size of your TV and where you’re hanging it. Make sure you mount your TV to the wall according to the manufacturer’s instructions.

Check for a secure connection between the wall plate and the TV plate.
If the cables dangling from the bottom of the TV aren’t put behind the wall, use a cord cover to conceal them.
With the correct materials and tools, hanging a television is simple. Choose the mount that best suits your needs. Determine the best location for your new flatscreen and the ideal viewing height. Install your mount and double-check that its level. Your television should be hung. Are you ready to go to your local store and find what you need for your project? To find goods and check inventories, use The Home Depot app. We’ll lead you to the exact aisle and bay you’re looking for.

Leave a Comment

Please rate*

Your email address will not be published. Required fields are marked *